Expand Configuration and Management Manual (G06.24+)

Expand Modifiers
Expand Configuration and Management Manual—523347-008
17-2
Required Modifiers
Table 17-1. Required Modifiers (page 1 of 3)
Modifier Description
ASSOCIATEDEV May be used to associate
•
The logical device name of a NAM process with an Expand-
over-NAM line-handler process.
•
A NonStop TCP/IP process with an Expand-over-IP line-
handler process.
•
An Asynchronous Transfer Mode (ATM) line with an
Expand-over-ATM line-handler process.
•
The ServerNet monitor process ($ZZSCL) with an Expand-
over-ServerNet line-handler process.
•
The FOX monitor process ($ZZFOX) with an Expand-over-
FOX line-handler process.
Required by: Expand-over-X25, Expand-over-SNA, and
Expand-over-ATM line-handler processes only.
Default: $ZZSCL for Expand-over-ServerNet and $ZZFOX for
Expand-over-FOX line-handler processes. There is no default
value for Expand-over-NAM, Expand-over-IP, and Expand-over-
ATM line-handler processes.
ASSOCIATESUBDEV Must be used to specify
•
The name of the X25AM subdevice to which an Expand-
over-X.25 line-handler process will bind.
•
The subdevice name of the SNAX/APN logical unit (LU)
used by an Expand-over-SNA line-handler process.
•
The name of the Asynchronous Transfer Mode (ATM)
service access point (SAP) used by an Expand-over-ATM
line-handler process.
Required by: Expand-over-X25 and Expand-over-SNA, and
Expand-over-ATM line-handler processes only.
Default: There is no default value for Expand-over-NAM line-
handler processes; the default value is #IP for Expand-over-ATM
line-handler processes (the only value allowed for Expand-over-
ATM).
ATMSEL Specifies a hexadecimal selector byte for the ATM line used by
the local Expand-over-ATM line-handler process.
Required by: Expand-over-ATM line-handler processes that use
switched virtual circuit (SVC) connections.
Default: %H80