Expand Configuration and Management Manual (G06.24+)

Expand Modifiers
Expand Configuration and Management Manual—523347-008
17-4
Required Modifiers
PVCNAME Specifies the name of a permanent virtual circuit (PVC).
Required by: Expand-over-ATM line-handler processes that use
PVC connections.
Default: None
SRCIPADDR Specifies the Internet Protocol (IP) address associated with a
NonStop TCP/IP process used by a local Expand-over-IP line-
handler process.
Required by: Expand-over-IP line-handler processes only.
Default: 0.0.0.0.
SRCIPPORT Specifies the port number used by a local Expand-over-IP line-
handler process.
Required by: Expand-over-IP line-handler processes only.
Default: 1024.
V6DESTIPADDR Specifies the destination NonStop TCP/IPv6 address used by
the remote Expand-over-IP line-handler process.
Required by: Expand-over-IP line-handler processes if IPVER
is IPv6.
Default: 0000:0000:0000:0000:0000:0000:0000:0000.
V6SRCIPADDR Specifies the source NonStop TCP/IPv6 address used by the
remote Expand-over-IP line-handler process.
Required by: Expand-over-IP line-handler processes if IPVER
is IPv6.
Default: 0000:0000:0000:0000:0000:0000:0000:0000.
*The default value for this modifier is invalid and must be changed.
Table 17-1. Required Modifiers (page 3 of 3)
Modifier Description