Expand Configuration and Management Manual (G06.24+)

About This Manual
Expand Configuration and Management Manual—523347-008
xxxix
Related HP Manuals
•
ASAP Server Manual
Availability Statistics and Performance (ASAP) is an availability, state, and
performance statistics collection infrastructure for NonStop Kernel operating
system and application resources. Reported resource classes include internal
customer Application domains, CPU, Disk, Expand, File, Node, Process,
ProcessBusy, RDF, Spooler, System, Tape, and TMF.
•
ASAP Extension Manual
This manual describes using the Availability Statistics and Performance Extension
(ASAPX) to collect, measure, view, and analyze application service-level metrics to
track the productivity, performance, and availability of applications.
•
ATM Configuration and Management Manual
This manual describes how to configure, operate, and manage the Asynchronous
Transfer Mode (ATM) subsystem on a NonStop S-series server. It includes detailed
descriptions of the Subsystem Control Facility (SCF) commands used with the
ATM subsystem.
•
Operator Messages Manual
This manual describes all messages that are distributed by the Event Management
Service (EMS). This manual provides an explanation of the cause of each
message, a discussion of its effects on the system, and suggestions for corrective
action.
•
ServerNet Cluster Manual
This manual describes the installation, configuration, and management of HP
NonStop ServerNet Cluster hardware and software.
•
ServerNet Cluster 6780 Planning and Installation Guide
This manual describes the installation and planning for the 6780 ServerNet Cluster
switch.
•
ServerNet/FX Adapter Configuration and Management Manual
This manual describes how to configure, operate, and manage the ServerNet/FX
adapter subsystem on a NonStop S-series server. It includes detailed descriptions
of the Subsystem Control Facility (SCF) commands used with the ServerNet/FX
adapter subsystem.
•
SNAX/XF and SNAX/APN Configuration and Management Manual
This manual describes how to configure the SNAX/XF and SNAX/APN
communications subsystems. It includes detailed descriptions of the Subsystem
Control Facility (SCF) commands used with the SNAX/XF and SNAX/APN
subsystems.