Expand Configuration and Management Manual (G06.24+)

Managing the Network
Expand Configuration and Management Manual—523347-008
19-13
Displaying $NCP Information
Table 19-2 lists the WAN subsystem SCF commands that display $NCP information.
INFO PROCESS $NCP, PATHSETS Displays the NCP pathmap information similar to
the LINESET command, but displays it in a
different format. This format displays both the
line-handler LDEV and name, as well as the
other information already in the LINESET
command. It also includes all of the information
displayed in the LINESET command, which are:
entry number (this is the LINESET column),
neighbor name and node number, linehandler
LDEV, Timefactor, CPU, PIN, Status, and FileErr
Number. The new information added to this
display is the path/line name.
INFO PROCESS $NCP, RPT Displays the information kept in the reverse
pairing table (RPT) for each multi-CPU path on
the selected system.
INFO PROCESS $NCP, SUPERPATH Displays the paths comprising each multi-CPU
path on the system. The effective time factor
(ETF) and base time factor (TF) is displayed for
each path.
INFO PROCESS $NCP, SYSTEMS SYSTEMS is similar to the CONNECTS
command, but displays all known systems. It
displays only the entries where a connection is
established. If no connection is established, it
displays an infinite time factor and hop count.
LISTDEV $NCP
or
LISTDEV TYPE 62
Displays the logical device (LDEV) name and
number, primary and backup processor and
process ID, device type and subtype, configured
RSIZE value, priority level of the device, and
fully qualified program file name for $NCP.
PROBE PROCESS $NCP Displays the current paths from one or more, or
all, of the remote systems in the network to a
selected system in the network.
STATS PROCESS $NCP, LOCALFLOW Displays aggregate packet statistics occurring at
a selected system.
STATS PROCESS $NCP, NETFLOW Displays packet statistics that represent the
communications occurring between two selected
systems in the network.
TRACE PROCESS $NCP Displays target-defined data items, alter trace
parameters, and end tracing.
VERSION PROCESS $NCP Displays the version level of $NCP.
Table 19-1. Expand SCF Commands for $NCP Information (page 2 of 2)
SCF Command Information Reported