Expand Configuration and Management Manual (G06.24+)

Configuration Quick Start
Expand Configuration and Management Manual—523347-008
1-5
Where to Find More Information About This Task
The following rules apply when creating profiles for lines in a multi-line path:
•
You can configure a maximum of eight lines in a multi-line path.
•
The lines in a multi-line path can be all the same type or they can be any
combination of dedicated lines, X.25 connections, and SNAX connections. You
cannot mix satellite-connect, Expand-over-ATM, and Expand-over-IP lines with
other line types. Expand-over-ServerNet and Expand-over-FOX lines cannot be
part of a multi-line path.
•
You must create a profile for each type of line that will be in a multi-line path. Lines
of the same type can share the same profile.
Where to Find More Information About This Task
Section 7, Configuring Direct-Connect and Satellite-Connect Lines
Section 8, Configuring Expand-Over-IP Lines
Section 9, Configuring Expand-Over-ATM Lines
Section 10, Configuring Expand-Over-X.25 Lines
Section 11, Configuring Expand-Over-SNA Lines
Section 12, Configuring Expand-Over-ServerNet Lines
Section 13, Configuring Expand-Over-FOX Lines
Section 14, Configuring Multi-Line Paths
Table 1-2. Profiles for Line-Logical Devices
Profile Name Type of Line-Logical Device
PEXQMSWN Direct-connect
PEXQMSAT Satellite-connect
PEXQMNAM Expand-over-NAM
PEXQMATM Expand-over-ATM
PEXQMIP Expand-over-IP