Expand Configuration and Management Manual (G06.24+)

Troubleshooting
Expand Configuration and Management Manual—523347-008
21-6
SCF Commands
The SCF STATUS command displays in Example 21-3 show you how to use the
detailed (DETAIL option) version of the STATUS PATH command to determine the
logical device (LDEV) numbers of the lines within a multi-line path. In the example, the
path logical device is named $PBAL4 and consists of two lines with LDEVs 88 and 89.
SCF STATUS LINE commands are used to determine the status of each line in the
path.
Example 21-2. SCF STATS Display
3-> stats line $b30s
EXPAND Stats LINE $B30S, PPID ( 2, 10), BPID ( 3, 16)
Resettime... FEB 18,1997 10:38:12 Sampletime... FEB 18,1997 15:32:36
---------------- LEVEL 2 ------------------
I-Frames S-Frames U-Frames
Sent 40651 59229 2
Rcvd 17053 50970 2
------------------------ LEVEL 2 DETAIL -----------------------------------
SABM DISC UA DM CMDR RR
Sent 1 0 1 0 0 59229
Rcvd 1 0 1 0 0 50969
RNR REJ SREJ I-FRM I-FRM(P)
Sent 0 0 0 40651 0
Rcvd 0 0 0 17053 0
---------------------------- DRIVER ----------------------------------------
Total Frms.. 0 Line Quality.. 100 No Buffer... 0
Err Frms.... 0 BCC Errs...... 0 Modem Errs.. 0
Rcv OverRun +0
------------------------- CLIP SPECIFIC ------------------------------------
FCS Errs.... 0 Addr Errs..... 0 Length Errs. 0
Rcv Abort... 0 Timeout....... 0 No Buffer... 0
CTS State... OFF DSR State..... OFF DCD State... OFF
Example 21-3. SCF STATUS Display
8-> status path $pbal4,detail
EXPAND Detailed Status PATH $PBAL4
PPID........ ( 2, 13) BPID........... ( 3, 13)
State....... STARTED Number of Lines.. 2
Trace Status OFF Superpath OFF
Line LDEVs.. 88 89
9-> status line $88
EXPAND Status LINE
Name State Status PPID BPID CIU-Path ConMgr-LDEV
$B21 STARTED READY 2, 13 3, 13 A 30
10-> status line $89
EXPAND Status LINE
Name State Status PPID BPID CIU-Path ConMgr-LDEV
$B20 STARTED READY 2, 13 3, 13 A 30