Expand Configuration and Management Manual (G06.24+)

Configuration Quick Start
Expand Configuration and Management Manual—523347-008
1-7
Creating a Single-Line Expand Line-Handler
Process
2. Using the information obtained from the SCF STATUS ADAPTER command,
record the following information in the SCF ADD DEVICE Command Worksheet on
page 1-10:
a. The name of the SWAN concentrator with the available WAN line in the
concname field. (For example: S01.)
b. The CLIP (1, 2, or 3) containing the available WAN line in the clipnum field.
(For example: 1.)
c. The line number of the available WAN line in the linenum field. (For example,
1.)
d. Record the configured path that you prefer to use (A or B) in the pathname
field. (For example: A.) Configured paths are indicated by the word
CONFIGURED following the path name in the SCF STATUS ADAPTER
command display.
Example 1-1. SCF STATUS ADAPTER Command
WAN Manager STATUS ADAPTER for ADAPTER \NODEA.$ZZWAN.#S01
State........... STARTED
Number of clips. 3
Clip 1 status : CONFIGURED
Clip 2 status : CONFIGURED
Clip 3 status : CONFIGURED
WAN Manager STATUS SERVER for CLIP \NODEA.$ZZWAN.#S01.1
State :......... STARTED
Path A..........: CONFIGURED
Path B..........: CONFIGURED
Number of lines. 2
Line............ 0 : $X25A
Line............ 1 : FREE
WAN Manager STATUS PATH for PATH \NODEA.$ZZWAN.#S01.1.A
State :......... STARTED
MEDIA TYPE...... ETHERNET
MEDIA ADDRESS... %H000000000000