Expand Configuration and Management Manual (G06.24+)

Troubleshooting
Expand Configuration and Management Manual—523347-008
21-12
$NCP Problems
INFO PROCESS $NCP, SYSTEMS Displays all known systems. If no connection is
established, the SYSTEMS option displays an infinite
time factor and hop count. The SYSTEMS option is
similar to the CONNECTS option, except that the
CONNECTS option displays only the systems
connected.
INFO PROCESS $NCP,
SUPERPATH
Displays the effective time factor (ETF), time factor
(TF), logical device (LDEV) number, and local and
remote processors for each path within each multi-
CPU path on the selected system.
PROBE PROCESS $NCP Provides status information about the intermediate
nodes in a path and displays the typical time to each
destination node.
Table 21-6. Identifying $NCP Problems With SCF Commands
Command Use