Expand Configuration and Management Manual (G06.24+)

Expand Configuration and Management Manual—523347-008
A-1
A SCF Error Messages
This appendix contains error messages returned by the SCF subsystem when you
execute SCF commands. For other Expand network-related errors, refer to the
Operator Messages Manual.
Expand Error 00001
Cause. You specified more than 30 object names in an SCF command.
Effect. The SCF command was not executed.
Recovery. Re-enter the command using fewer that 30 object names.
Expand Error 00002
Cause. The Expand line-handler process was not started, or a file-system error
occurred.
Effect. The SCF command was not executed.
Recovery. Start the Expand line-handler process, or correct the file-system error.
Expand Error 00003
Cause. This is a normal event.
Effect. The SCF command is not affected.
Recovery. No action is required.
Expand Error 00004
Cause. The token specified is not of the same type as expected.
Effect. The SCF command was not executed.
Recovery. Examine the command, then enter the correct command.
EXPAND 00001 Too many object names. Object Name: object-name.
EXPAND 00002 Negative LH response. OBJNAME: object-name
File system err #R##.
EXPAND 00003 Empty response.
EXPAND 00004 Token conflicted. OBJNAME: object-name
TOKEN: token-name.