Expand Configuration and Management Manual (G06.24+)

SCF Error Messages
Expand Configuration and Management Manual—523347-008
A-2
Expand Error 00005
Expand Error 00005
Cause. The subtype of an Expand line-handler process object name does not match
the expected object type. For example, you may have entered a path logical device
name after specifying a LINE object type in the SCF command.
Effect. The SCF command was not executed.
Recovery. Re-enter the command with matching object types and object names.
Expand Error 00006
Cause. Because of an Expand internal error, tracing could not start.
Effect. Tracing has not started.
Recovery. File a detailed Product Report (TPR) immediately.
Expand Error 00007
Cause. Because of an Expand internal error, an illegal value was accepted.
Effect. The SCF command was not executed.
Recovery. File a detailed Product Report (TPR) immediately.
Expand Error 00008
Cause. You entered the same attribute twice in the same command.
Effect. The SCF command was not executed.
Recovery. Re-enter the command using the attribute only once.
EXPAND 00005 Object type and name mismatched.
OBJNAME: object-name OBJTYPE: object-type.
EXPAND 00006 Encountered error when tracing EXPAND manager
process. OBJNAME: object-name.
EXPAND 00007 INTERNAL ERR: Case value out of range.
EXPAND 00008 Duplicate Attribute attribute-list.