Expand Configuration and Management Manual (G06.24+)

SCF Error Messages
Expand Configuration and Management Manual—523347-008
A-3
Expand Error 00009
Expand Error 00009
Cause. The SCF command was rejected by the network control process ($NCP).
Effect. The SCF command was not executed.
Recovery. Correct the file-system error, then re-enter the command.
Expand Error 00010
Cause. The local network control process ($NCP) received a bad network trace record
from a remote system.
Effect. Tracing has stopped.
Recovery. File a detailed Product Report (TPR) immediately.
Expand Error 00011
Cause. The value entered in the command is not valid for the attribute, or the
specified attribute is not valid for the object name.
Effect. The SCF command was not executed.
Recovery. Re-enter the command using the correct value for the attribute.
Expand Error 00012
Cause. You specified 30 or more system names or system numbers in the command.
Effect. The SCF command was not executed.
Recovery. Re-enter the command specifying fewer than 30 systems.
EXPAND 00009 Negative $NCP response. OBJNAME: object-name.
File system err: #R##.
EXPAND 00010 INTERNAL ERR: Rcvd Bad Network trace from
SYSTEM #R# to SYSTEM #R#.
EXPAND 00011 Invalid Attribute OR Attribute
value: value for attribute-list.
EXPAND 00012 Too many systems selected.