Expand Configuration and Management Manual (G06.24+)

SCF Error Messages
Expand Configuration and Management Manual—523347-008
A-5
Expand Error 00017
Expand Error 00017
Cause. The SCF command was rejected by the Expand manager process ($ZEXP).
The information requested cannot be obtained from an older (down-version) system.
Effect. The SCF command was not executed.
Recovery. No action is required.
Expand Error 00018
Cause. The Expand line-handler process is configured with incorrect modifier values
or the system does not have enough memory.
Effect. The Expand line-handler process is not operational.
Recovery. Refer to the event log for more detailed error information, and respond
accordingly. Use either the OSM or TSM event viewers to display the event log.
Expand Error 00019
Cause. The SCF command was rejected by the Expand manager process ($ZEXP).
SUPERPATH may be set to on ON only when L4EXTPACKETS is set to ON.
L4EXTPACKETS may be set to OFF only when SUPERPATH is set to OFF.
Effect. The SCF command is not executed.
Recovery. Change L4EXTPACKETS to ON before you change SUPERPATH to ON or
change SUPERPATH to OFF before you change L4EXTPACKETS to OFF.
Expand Error 00020
Cause. The SCF INFO PROCESS $NCP, SUPERPATH command was rejected
because there is no active multi-CPU path.
Effect. The SCF command is not executed.
Recovery. No action is required.
EXPAND 00017 Not supported for a down-version system.
EXPAND E00018 Configuration error or Memory allocation
failure.
EXPAND E00019 Extended packet format required for multi-CPU
paths.
EXPAND E00020 No multi-CPU path active.