Expand Configuration and Management Manual (G06.24+)

Expand and WAN SCF Comparison
Expand Configuration and Management Manual—523347-008
C-2
Command Comparison
ALTER ALTER Expand SCF:
•
Use the ALTER LINE and ALTER PATH
commands to make temporary changes to
attributes and attribute values for a selected
Expand line-handler process.
•
Use the ALTER PROCESS command to
make temporary changes to attributes and
attribute values for the network control
process ($NCP).
WAN SCF:
•
Use the ALTER DEVICE command to make
permanent changes to modifier and modifier
values for a selected Expand line-handler
process or the network control process
($NCP).
Note: See ALTER Command Comparison on page C-7 for
more information.
DELETE DELETE Expand SCF:
•
Use the DELETE ENTRY command to
remove a system name from the Network
Routing Table (NRT).
WAN SCF:
•
Use the DELETE DEVICE command to
delete a selected Expand line-handler
process or the network control process
($NCP) from the system.
Table C-1. Expand and WAN SCF Command Comparison (page 2 of 6)
Expand
Subsystem SCF
Command
WAN
Subsystem SCF
Command Command Function