Expand Configuration and Management Manual (G06.24+)

Expand Configuration and Management Manual—523347-008
Index-1
Index
A
ABORT command 15-8/15-9
ABORT LINE command 19-26
ABORT PATH command 19-26
ABORTTIMER attribute
ALTER PROCESS $NCP command
and 15-21
INFO PROCESS $NCP command
and 15-51
ABORTTIMER modifier 6-4, 18-28
ACK 18-15
ACTIVATE command 15-9
ACTIVATE PROCESS $NCP 19-27
Active connect request 18-51, 18-56, 18-61
ADD DEVICE command 19-19
ADDRESS attribute, INFO LINE command
and 15-32
AFTERMAXRETRIES attribute
ALTER LINE command and 15-14
INFO LINE command and 15-35,
15-37, 15-42, 15-46
AFTERMAXRETRIES_DOWN
modifier 17-5, 18-52, 18-56, 18-61
AFTERMAXRETRIES_PASSIVE
modifier 17-5, 18-52, 18-56, 18-61
ALGORITHM modifier 6-5, 15-51
ALTER DEVICE command 15-10, 18-23
ALTER LINE command 15-12, 15-20,
18-23
ALTER PATH command 15-11/15-12
ALTER PROCESS $NCP
command 15-21/15-23, 19-27
Altering several lines 15-18
Altering several paths 15-12
ALTTCPIP attribute 21-15
Application message size
effect on performance of 20-7
Expand subsystem overhead and 20-8
Applications, writing network 2-2
ASAP 21-10
ASSOCIATEDEV attribute
ALTER LINE command and 15-14
INFO LINE command and 15-34,
15-38, 15-40, 15-42, 15-44, 15-46
ASSOCIATEDEV modifier 17-5, 21-19
ASSOCIATESUBDEV attribute
INFO LINE command and 15-40,
15-42, 15-44, 15-47
ASSOCIATESUBDEV modifier 17-6
Asynchronous Transfer Mode (ATM)
addresses 9-6
subsystem 9-3, 18-59
ATM 3 ServerNet adapter 9-3, 18-6
ATM addresses 9-6, 18-60
ATM protocol direct service access point
(ATMSAP) 9-5
ATM subsystem 9-3, 18-59
See also Asynchronous Transfer Mode
(ATM) subsystem
ATM3SA 8-5, 9-3, 18-6
ATMSAP connections 9-1, 18-59/18-60
ATMSEL modifier 17-6
AUTOLOAD attribute, INFO LINE command
and 15-32
AUTOMATICMAPTIMER attribute, INFO
PROCESS $NCP command and 15-50
AUTOMATICMAPTIMER modifier 6-5,
18-27
AUTOREBAL attribute
ALTER PROCESS $NCP command
and 15-21
INFO PROCESS $NCP command
and 15-53
AUTOREBALTIME attribute
ALTER PROCESS $NCP command
and 15-22
INFO PROCESS $NCP command
and 15-54