Expand Configuration and Management Manual (G06.24+)

Contents

Expand Configuration and Management Manual—523347-008

8. Configuring Expand-Over-IP Lines (continued)

Parallel Library TCP/IP and NonStop TCP/IPv6 Processes 8-4

Redundancy in Ethernet Adapters 8-4

Local Area Network (LAN) Driver and Interrupt Handlers (DIHs) 8-5

Asynchronous Transfer Mode (ATM) Subsystem 8-5

E4SA, FESA, GESA, G4SA and ATM3SA 8-5

Topology Considerations 8-6

Summary of Configuration Steps 8-8

Step 1 (A): Select a Process and SUBNET for NonStop TCP/IP Use 8-9

Select a NonStop TCP/IP Process 8-9

Select a SUBNET for NonStop TCP/IP 8-9

Step 1 (A): Select a Process and SUBNET for NonStop TCP/IP Use 8-9

Select a NonStop TCP/IP Process 8-9

Select a SUBNET for NonStop TCP/IP 8-9

Creating an Ethernet SUBNET or ATM SUBNET 8-10

Step 1 (B): Select a TCPSAM Process and SUBNET for Parallel Library TCP/IP Use

8-11

Select a TCPSAM Process 8-11

Select a SUBNET for Parallel Library TCP/IP 8-12

Creating an Ethernet SUBNET 8-12

Step 1 (C): Select a Process and SUBNET for NonStop TCP/IPv6 Use 8-13

Select a SUBNET for NonStop TCP/IPv6 Use 8-13

Select a TCP6SAM Process 8-15

Creating an Ethernet Subnet 8-16

Step 2 (A): Identify an Available UDP Port Number 8-16

Step 2 (B): Identify an Available UDP Port Number for Parallel Library TCP/IP

Use 8-17

Step 2 (C): Identify an Available UDP Port Number for TCP/IPv6 Use

8-18

Step 3: Create a Profile for the Line-Handler Process

8-20

ADD Profile Command 8-20

Example 8-21

Step 4: Create the Line-Handler Process 8-21

ADD DEVICE Command 8-21

Considerations 8-24

Examples

8-25

Step 5: Start the Line-Handler Process

8-25

Step 6: Start the Line 8-26

Add a Configured Tunnel for an Expand Line 8-26