Expand Configuration and Management Manual (G06.24+)

Contents
Expand Configuration and Management Manual—523347-008
vi
8. Configuring Expand-Over-IP Lines (continued)
8. Configuring Expand-Over-IP Lines (continued)
Profile Modifiers 8-28
Recommended Modifiers 8-28
Modifiers for Special Features 8-29
PEXQSIP Modifiers 8-29
9. Configuring Expand-Over-ATM Lines
Required Hardware and Software 9-2
QIO Subsystem 9-2
ATM Subsystem 9-3
SLSA Subsystem 9-3
ATM 3 ServerNet Adapter (ATM3SA) 9-3
Topology Considerations 9-4
Summary of Configuration Steps 9-5
Step 1: Identify the ATM Connection 9-5
Configuring an Expand Line-Handler Process That Uses a PVC 9-6
Configuring an Expand Line-Handler Process That Uses an SVC 9-6
Configuring an Expand Line-Handler Process That Uses ATMSAP 9-9
Step 2: Create a Profile for the Line-Handler Process 9-10
ADD Profile Command 9-11
Example 9-11
Step 3: Create the Line-Handler Process 9-12
ADD DEVICE Command 9-12
Considerations 9-16
Examples 9-16
Step 4: Start the Line-Handler Process 9-17
Step 5: Start the Line 9-17
Profile Modifiers 9-17
Recommended Modifiers 9-18
Modifiers for Special Features 9-19
PEXQSATM Modifiers 9-19
10. Configuring Expand-Over-X.25 Lines
Required Hardware and Software 10-1
X25AM Line-Handler Process 10-3
QIO Subsystem 10-3
Wide Area Network (WAN) Shared Driver 10-3
NonStop TCP/IP Process 10-3
Local Area Network (LAN) Driver and Interrupt Handlers (DIHs) 10-4