Expand Management Programming Manual

COMMANDS AND RESPONSES
INFO LINE Command
ZSPI-VAL-FALSE Automatic downloading of the CLIP is
disabled.
This field corresponds to the SYSGEN modifiers AUTOLOAD and
NOAUTOLOAD.
ZCHARSET contains a value indicating the character set for the
line. This field can have the following values:
ZEXP-VAL-ASCII The character set for the line is ASCII.
ZEXP-VAL-EBCDIC The character set for the line is EBCDIC.
This field corresponds to the SYSGEN modifiers ASCII and
EBCDIC.
ZDELAY contains the amount of time in microseconds between
transmissions. This field has no corresponding SYSGEN
modifier.
ZDSR-TIMEOUT contains the amount of time in microseconds that
the CLIP will wait for the Data Set Ready (DSR) signal from
the modem before it informs the Communications Access Process
(CAP) of no detection. This field corresponds to the SYSGEN
modifier DSRTIMER.
ZFRAME-SIZE contains the frame size in words. This field
corresponds to the SYSGEN modifier FRAMESIZE.
ZIDLE-TIMEOUT contains the amount of time in microseconds
that the level-2 Receive Ready (RR) timer will wait before
timing out. This field corresponds to the SYSGEN modifier
L2IDLETIMEOUT.
ZINTERF contains a value that indicates the hardware inter-
face. This field can have the following values:
ZEXP-VAL-RS232 The hardware interface is RS-232.
ZEXP-VAL-RS422 The hardware interface is RS-422.
This field corresponds to the SYSGEN modifiers RS232 and
RS422.
ZPROG contains the file name of the CLIP program to be
downloaded. This field corresponds to the SYSGEN modifier
PROGRAM.
ZPROTOID contains the CLIP protocol identification. This
field has no corresponding SYSGEN modifier.
ZREAD-BUFFS contains the number of read buffers allocated.
This field corresponds to the SYSGEN modifier READBUFFERS.
7-40