Expand Management Programming Manual

COMMANDS AND RESPONSES
LOAD Command
2 (ZEXP-ERR-NEG-LH-RSP): The EXPAND line handler returned a
negative response.
3 (ZEXP-ERR-EMPT-RSP): The empty response record is being
returned.
5 (ZEXP-ERR-OBJ-TYPE-NAME-MISMATC): A conflict exists be-
tween the object type and an object name.
For descriptions of all EXPAND error numbers and their associated
error lists, refer to Appendix A.
ZSPI-TKN-ERRLIST is a standard SPI error list, as described in
the Distributed Systems Management (DSM) Programming Manual . The
list ends with the token ZSPI-TKN-ENDLIST.
ZSPI-TKN-CONTEXT is the standard SPI context token described in
the Distributed Systems Management (DSM) Programming Manual .
Operational Notes
• LOAD is a sensitive command.
• The specified lines must be in the STOPPED summary state when
the LOAD command is issued.
• A RESET command should be issued before the LOAD command is
issued.
• The CLIP that is downloaded is not started. Use a START
command to start the CLIP.
• No summary-state transition is associated with this command.
7-60