Expand Management Programming Manual

COMMANDS AND RESPONSES
TRACE Command (NCP Process, Lines, and Paths)
ZCOM-MAP-TRACE-MODIF is a standard data-communications extensible
structured token described in the Communications Management
Programming Manual . This token must be present in the command,
and duplicate occurrences are not allowed.
ZCOM-TKN-TRACE-OPT is a standard data-communications token de-
scribed in the Communications Management Programming Manual .
This token must be present in the command. The possible values
for ZCOM-TKN-TRACE-OPT are the following:
-1 Mask bits 0 through 31 are all set on.
0 Mask bit 0 is set on.
1 Mask bit 1 is set on.
2 Mask bit 2 is set on.
. .
. .
. .
31 Mask bit 31 is set on.
The mask bits have the following meanings for this form of the
TRACE command:
Mask Trace
Bits Meaning Record Type
----- ------------------------------ -----------
0 Level-0 events:
0 Frames out, nonextended* 0
0 Frames in, nonextended* 1
0 Frames out, extended* 7
0 Frames in, extended* 8
2 Level-2 events 2
3 Level-3 events 3
4 Level-4 events 4
4 Line handler to NCP messages 5
4 System abort messages 6
10 CLB inbound frames** 248
11 CLB outbound frames** 249
15,16 CLIP inbound frames** 255
15,17 CLIP outbound frames** 255
15,21 CLIP level-2 events** 255
* applies only to lines and paths that are not on 6100 CSS.
** applies only to 6100 CSS lines and paths.
Duplicate occurrences of ZCOM-TKN-TRACE-OPT are allowed, so that
more than one option can be selected.
(ZSPI-TKN-) MAXRESP, CONTEXT, RESPONSE-TYPE, ALLOW-TYPE, and
COMMENT are standard SPI tokens described in the Distributed
Systems Management (DSM) Programming Manual . With the exception
of ZSPI-TKN-COMMENT, duplicate occurrences of these tokens are
not allowed.
7-123