Expand Management Programming Manual

EVENT MANAGEMENT
45: ZEXP-EVT-NET-LINE-NOT-READY
Probable Cause
The operator brought the indicated line down, or an error
occurred that brought it down. The specific cause of the event
is given by the token ZEXP-TKN-LINE-NOT-READY-ERR.
The line handler is not ready to accept further network requests,
and the NCP must find an alternate communication path.
Recommended Action
Appropriate recovery depends on the file-system error that
occurred and on the line type. For instance, for an error
140 (modem error) on a direct-connect bit-synchronous or byte-
synchronous line, you should check the modem, the cables, and
the SYSGEN configuration. For an error 218 (interrupt timeout)
on such a line, check the modem, the cables, and the clock on
the modem. For most errors on a NETNAM line, check the SYSGEN
configuration.
For more information on file-system errors and how to recover
from them, refer to the System Procedure Errors and Messages
Manual .
8-34