Expand Management Programming Manual

EVENT MANAGEMENT
90: ZEXP-EVT-NET-BAD-SYSGEN
Unconditional Tokens
ZSPI-TKN-SSID is the EXPAND subsystem ID, and its value is ZEXP-
VAL-SSID. This token is described in the Distributed Systems
Management (DSM) Programming Manual .
ZEMS-TKN-EVENTNUMBER is the event number. Its value is ZEXP-EVT-
NET-BAD-SYSGEN (90).
ZEMS-TKN-SUBJECT-MARK is the standard EMS token that always
immediately precedes the subject token--here, ZEMS-TKN-LDEVNAME.
ZEMS-TKN-LDEVNAME is the logical device name of the line or path
whose SYSGEN configuration caused the problem.
ZEMS-TKN-EMPHASIS contains the value ZSPI-VAL-TRUE, indicating
that this event is a critical event. This token is described in
the Event Management Service (EMS) Manual .
ZEMS-TKN-CONSOLE-PRINT contains the value ZSPI-VAL-TRUE. This
token is described in the Event Management Service (EMS) Manual .
(ZEMS-TKN-) CPU, CRTPID, GENTIME, LOGTIME, PIN, SYSTEM, and
USERID are standard EMS tokens described in the Event Management
Service (EMS) Manual .
ZEXP-TKN-SYS-MSG-MODE indicates what software component this
EXPAND event message relates to, as described in Section 6,
"Common Definitions."
ZEMS-TKN-LDEV is a standard EMS token described in the Event
Management Service (EMS) Manual .
ZEXP-TKN-BAD-SYSGEN-CAUSE indicates the SYSGEN problem that was
detected. This token can have the following values:
1 A single-line line handler (subtype 0 or 5) was
generated on the same path as another line, probably
with a MULTI parameter.
2 More than eight logical devices for lines were speci-
fied for a logical path.
3 An invalid subtype was specified for a line.
4 Lines on CSS6100-type controllers and lines on
6200-type controllers were mixed on the same path.
5 The NEXTSYS modifier was missing or invalid (possibly
greater than or equal to the MAXIMUM_SYSTEMS
parameter). This error can occur when the MULTI
8-48