Expand Management Programming Manual

EVENT MANAGEMENT
90: ZEXP-EVT-NET-BAD-SYSGEN
9 The frame size must be the same for all line handlers
in the network. Reduce the L2WINDOW size, the number
of READBUFFERS, and/or the FRAMESIZE. Change the
FRAMESIZE for all line handlers simultaneously.
10 Increase the LINEBUFFERSIZE, decrease the L2WINDOW
size, or specify the number of READBUFFERS.
11-14 If the processor does not have sufficient physical
memory for the line handler to run, contact your Tandem
representative.
15-16 If the processor does not have sufficient physical
memory for the line handler to run, contact your Tandem
representative.
17-19 Reduce the amount of I/O space consumed by the EXPAND
line handlers by doing one or more of the following:
set the TXCOPY option on any line handler; reduce
the window size and the number of receive buffers;
and/or reduce the FRAMESIZE (the latter must be done
simultaneously for all line handlers on all nodes in
the network).
20-24 If the processor does not have sufficient physical
memory for the line handler to run, contact your Tandem
representative.
25-26 Check and correct the unit addresses supplied to SYSGEN
and COUP.
99 Contact your Tandem representative.
8-51