Expand Management Programming Manual

EVENT MANAGEMENT
146: ZEXP-EVT-CSS-UNIT-ERROR
Event-Message Text
In the text message, ldev corresponds to the value of ZEMS-TKN-
LDEV and ccu corresponds to the value of ZEMS-TKN-CU. The values
path , param3 , and param4 do not correspond to the values of
tokens in the event message.
Probable Cause
The 6100 family controller hardware failed while attempting to
download the CLIP or the CIU. The CLIP or CIU is not downloaded
and remains in the starting and boot states.
This event message is usually accompanied by another event
message or by a file-system error message.
The value param3 in the text message contains the Communications
Subsystem Manager (CSM) error code, which can have the following
values:
1004 CSM attempted an operation in a processor that is down.
1005 The CIU was in the DIAGNOSE state when it received the
request; it could not perform the operation.
1008 There was an invalid header in the software image read
from the disk during an attempted download operation.
1009 CSM detected a disk error when trying to read the
software image during an attempted download.
1014 The user tried to SUSPEND an already suspended object.
1016 The named object has either stopped or was never
started, and the requested operation requires that the
object be started.
1017 The named object has been started, and the requested
operation requires that the object be stopped.
1018 The named object has been activated, and the requested
operation requires that the object be suspended.
1021 The user tried to initiate a trace on a data link with a
trace already in progress.
1022 The Communications Management Interface (CMI) request
contained an invalid message TYPE.
8-63