Fast Ethernet Adapter Installation and Support Guide

Relocating an FESA
Fast Ethernet Adapter Installation and Support Guide—425685-003
4-18
Stop the FESA
2. Stop access to the logical interface (LIF) associated with the Fast Ethernet
ServerNet adapter (FESA) to be relocated.
Use the SCF STOP LIF command for each LIF:
STOP LIF $ZZLAN.lif-name
If you receive a message that the LIF client is still active, use the SCF ABORT
LIF command to remove the LIF.
3. Verify that the LIF associated with the FESA to be relocated is in the STOPPED
state.
Use the SCF STATUS LIF command:
STATUS LIF $ZZLAN.*
Example 4-24 shows the output of this command. Note that the logical
interface (LIF) is in the STOPPED state.
4. Stop the FESA object and its subordinate objects.
You can use either SCF or the TSM Service Application to perform this step.
a. Using SCF to Stop the Adapter:
Use the SCF STOP ADAPTER command with the SUB ALL option The SUB
ALL option stops the ADAPTER object and all its subordinate objects.
STOP ADAPTER $adapter-name, SUB ALL
b. Using the TSM Service Application to Stop the Adapter:
1. Log on to the TSM Service Application.
2. In the Tree view, select the FESA.
3. From the Display menu, choose Actions.
4. Select Stop.
5. Click Perform action.
Example 4-24. SCF STATUS LIF Command
->STATUS LIF $ZZLAN.*
SLSA Status LIF
Name State Access State
$ZZLAN.L018 STOPPED UP