Fast Ethernet Adapter Installation and Support Guide

Relocating an FESA
Fast Ethernet Adapter Installation and Support Guide—425685-003
4-21
Remove and Install the FESA
Remove and Install the FESA
The following explains how to remove the FESA that will be relocated to a new slot.
Review Standard Operating Practices
Standard operating practices include the following:
•
Work in an electrostatic discharge (ESD) protected environment.
•
Remove all metal accessories before working with electrical equipment.
•
Restrain any dangling items that can get caught in equipment.
•
Obtain an ESD protection kit and follow the directions that come with the kit.
Figure 4-3 on page 4-22 illustrates an ESD protected environment.
Table 4-2. Replacement Checklist
Step Description
1.
Review Standard Operating Practices
2.
Remove and Install the Adapter
3.
Check the Installation of the FESA
Note. Whenever you handle a Fast Ethernet ServerNet adapter (FESA), you should follow
standard operating practices to avoid damage to the equipment.