Fast Ethernet Adapter Installation and Support Guide

Relocating an FESA
Fast Ethernet Adapter Installation and Support Guide—425685-003
4-24
Remove and Install the Adapter
Figure 4-5 shows how to pull the FESA out of the slot.
5. Move the FESA to the new slot.
a. Disconnect the grounding clip of your ESD wriststrap from the system
enclosure, and connect it to an exposed, unpainted metal surface on the
FESA.
b. Grasp the FESA by its ejector with one hand, and support the bottom edge of
the FESA with the other hand. Carry the FESA to the slot where it is to be
installed.
Figure 4-5. Removing an FESA
Note. The FESA weights 6.75 pounds (3 kilograms)
059CDT .CDD