Fast Ethernet Adapter Installation and Support Guide

Relocating an FESA
Fast Ethernet Adapter Installation and Support Guide—425685-003
4-35
Add the FESA Using SCF
2. From the Display menu, choose Firmware Update.
3. From the Resource type pull-down menu, select resource type.
4. From the Display pull-down menu, select Down-rev only.
A list of resources whose firmware is older than the version of the SYSnn is
displayed in the Available list box. Do the following:
5. Double-click on the resource. The resource is displayed in the Selected list
box.
6. Click Perform action to initiate the firmware update.
For information on configuring the conventional TCP/IP, Parallel Library TCP/IP,
NonStop TCP/IPv6, IPX/SPX, or Port Access Method (PAM) subsystems to access the
FESA through the SLSA subsystem, refer to the following manuals:
•
LAN Configuration and Management Manual
•
TCP/IP Configuration and Management Manual
•
TCP/IP (Parallel Library) Configuration and Management Manual
•
TCP/IPv6 Configuration and Management Manual
•
IPX/SPX Configuration and Management Manual
•
PAM Configuration and Management Manual