Fast Ethernet Adapter Installation and Support Guide

Introduction to the Fast Ethernet ServerNet Adapter
(FESA)
Fast Ethernet Adapter Installation and Support Guide—425685-003
1-9
Manufacturing Naming Conventions
Manufacturing Naming Conventions
HP manufacturing uses a naming convention for processes and devices that relates
logical names to the physical location of devices. Table 1-1 describes the naming
conventions used for SLSA subsystem processes and other processes and devices
required by the SLSA subsystem.
cabid
is the two-digit number that identifies the enclosure; cabid is also the group
number.
slot
is the physical slot number in the enclosure:
Table 1-1. Naming Convention for LAN Subsystem and Related Processes
Process or Device Type Convention Example
LAN Manager (LANMAN) process Must be $ZZLAN $ZZLAN
Logical interface (LIF) $ZZLAN.Lcabid-portid $ZZLAN.L018
Fast Ethernet ServerNet adapter
(FESA)
$ZZLAN.Ecabid-slot $ZZLAN.E0153
cabid Description Range of Values
0n The object is in processor enclosure n.01-08
n1 The object is in I/O enclosure 1
attached to processor enclosure n.
11, 21, 31, 41, 51, 61, 71, or
81
n2 The object is in I/O enclosure 2
attached to processor enclosure n.
12, 22, 32, 42, 52, 62, 72, or
82
n3 The object is in I/O enclosure 3
attached to processor enclosure n.
13, 23, 33, 43, 53, 63, 73, or
83
Note. FESAs (including FESA connections via S-series I/O enclosures) are not supported
on NonStop BladeSystems.
Number Description
51 to 54 For the FESA.