Fast Ethernet Adapter Installation and Support Guide

Contents
Fast Ethernet Adapter Installation and Support Guide—425685-003
iii
4. Relocating an FESA (continued)
4. Relocating an FESA (continued)
Remove and Install the FESA 4-21
Review Standard Operating Practices 4-21
Remove and Install the Adapter 4-23
Check the Installation of the FESA 4-28
Resume Operations 4-30
Complete the Configuration Form 4-30
Add the FESA Using SCF 4-33
A. FESA Configuration Form
B. Preparing an FESA for PMF or IOMF CRU Replacement
Safety and Compliance
Glossary
Index
Examples
Example 2-1. SCF STATUS Commands 2-17
Example 3-1. SCF INFO LIF Command 3-5
Example 3-2. SCF INFO SUBNET Command, NonStop TCP/IPv6 3-6
Example 3-3. SCF NAMES Command 3-7
Example 3-4. SCF INFO LINE Command 3-7
Example 3-5. SCF NAMES SUBSYS Command 3-8
Example 3-6. SCF INFO PROCESS Command 3-8
Example 3-7.
SCF LISTDEV Command 3-9
Example 3-8.
SCF INFO LINE Command 3-9
Example 3-9. SCF NAMES ADAPTER command 3-10
Example 3-10. SCF INFO ADAPTER command 3-10
Example 3-11. SCF INFO DEVICE command 3-11
Example 3-12. SCF STATUS LINE Command 3-12
Example 3-13. SCF STATUS PATH Command 3-12
Example 3-14. SCF STATUS DEVICE Command 3-13
Example 3-15. SCF STATUS ADAPTER Command 3-13
Example 3-16. SCF STATUS LINE Command 3-14
Example 3-17. SCF STATUS PATH Command 3-14
Example 3-18. SCF STATUS DEVICE Command 3-14
Example 3-19. SCF STATUS PROCESS Command 3-15