Fast Ethernet Adapter Installation and Support Guide
Replacing an FESA
Fast Ethernet Adapter Installation and Support Guide—425685-003
3-9
Identify Any Communications Lines and ServerNet
Wide Area Network (SWAN) Using the FESA
8. Determine if any of the Expand-over-IP lines configured on the system use the port
on the FESA to be replaced.
a. Use the SCF INFO LINE command with the DETAIL option for each Expand-
over-IP line you identified in Step 7:
INFO LINE $line-name, DETAIL
b. Scan the output of the command for the TCP/IP process and IP address used
by the Expand-over-IP line and compare this information to the TCP/IP process
and IP address that you found in Step 2. On the FESA Planning Worksheet on
page 3-4,record the Expand-over-IP line that uses the TCP/IP process and IP
address.
Example 3-8 shows the output of this command. The TCP/IP process used by
the Expand-over-IP line is shown in the Associatedev field and the local IP
address is shown in the SrcIpAddr field. In this example, the Expand-over-IP
line named $IPYEA uses the TCP/IP process named $ZTC23 and the IP
address 172.17.203.37.
Example 3-7. SCF LISTDEV Command
->LISTDEV TYPE 63,0
LDev Name PPID BPID Type Rsize Pri Program
109 $IPYEA 3,9 2,7 (63,0) 3 199 \COWBOY.$DATA00.T9057ADJ.LHOBJ
159 $IPCORE 0,16 1,15 (63,0) 3 199 \COWBOY.$DATA00.T9057ADJ.LHOBJ
In this example, two Expand-over-IP lines (named $IPYEA and $IPCORE) are
configured on the system.
This is an example of the SCF LISTDEV command display for Expand-over-IP lines
that are part of a multiline path:
->LISTDEV TYPE 63,2
LDev Name PPID BPID Type Rsize Pri Program
56 $IPC03 2,16 3,16 (63,2) 3 199 \COWBOY.$DATA00.T9057ADJ.LHOBJ
84 $IPC02 2,16 3,16 (63,2) 3 199 \COWBOY.$DATA00.T9057ADJ.LHOBJ
Example 3-8. SCF INFO LINE Command
->INFO LINE $IPYEA,DETAIL
EXPAND Detailed Info LINE $IPYEA
*Associatedev... $ZTC23 *Maxconnects. 0 Delay.... 0:00:00.10
Framesize...... 132 *Speed....... 74666 *Retryprobe 3
*Timerinactivity 0:00:00.00 *Timerprobe.. 0:00:30.00 Txwindow.. 7
*AfterMaxRetries PASSIVE StartUp...... OFF Rsize..... 3
*Timerreconnect. 0:00:30.00 L2Protocol... Net^IP
*DestIpAddr 172.17.203.37 *DestIpPort 2003
*SrcIpAddr 172.17.208.20 *SrcIpAddr 2003