Fast Ethernet Adapter Installation and Support Guide

Replacing an FESA
Fast Ethernet Adapter Installation and Support Guide—425685-003
3-19
Label the Communications Cables Connected to the
FESA
2. Tag the communication cable connected to the FESA with a physical label,
preferably at both ends. The label should include the following information:
•
The physical interface (PIF) name assigned to the line. For example,
E0154.0.A.
•
A description of the equipment and connector to which the cable is to be
connected.
•
The slot location of the FESA to which the cable is connected.
Figure 3-2. FESA Slot Locations
NonStop S-Series I/O
Enclosure
NonStop S-Series Processor
Enclosure
(Service Side)
(Service Side)
I/O enclosures can use slots 51
through 54 for FESA CRUs
Processor enclosures can only use
slots 53 and 54 for FESA CRUs