Fast Ethernet Adapter Installation and Support Guide

Replacing an FESA
Fast Ethernet Adapter Installation and Support Guide—425685-003
3-20
Replace the FESA
Replace the FESA
The following explains how to replace the FESA. You must remove the adapter and
then replace it.
Review Standard Operating Practices
Standard operating practices include the following:
•
Work in an electrostatic discharge (ESD) protected environment.
•
Remove all metal accessories before working with electrical equipment.
•
Restrain any dangling items that can get caught in equipment.
•
Obtain an ESD protection kit and follow the directions that come with the kit.
Figure 3-3 on page 3-21 illustrates an ESD protected environment.
Table 3-2. Replacement Checklist
Step Description
1.
Review Standard Operating Practices
2.
Remove the Adapter
3.
Inspect the New FESA and Backplane
4.
Unpack and Install the New FESA
5.
Check the Installation of the New FESA
Note. Whenever you handle an Fast Ethernet ServerNet adapter (FESA), you should follow
standard operating practices to avoid damage to the equipment.