Fast Ethernet Adapter Installation and Support Guide

Contents
Fast Ethernet Adapter Installation and Support Guide—425685-003
v
Examples (continued)
Examples (continued)
Example 4-21. SCF STOP SUBNET Command 4-16
Example 4-22. SCF INFO ADAPTER Command 4-17
Example 4-23. SCF INFO LIF Command 4-17
Example 4-24. SCF STATUS LIF Command 4-18
Example 4-25. SCF STATUS ADAPTER Command 4-19
Example 4-26. SCF STATUS Commands 4-34
Figures
Figure 1-1. Fast Ethernet ServerNet Adapter (FESA) 1-4
Figure 1-2. How HP Subsystems and Utilities Use the SLSA Subsystem to Access
an FESA 1-8
Figure 2-1. Completed FESA Configuration Form 2-4
Figure 2-2. FESA Slot Locations 2-5
Figure 2-3. FESA Installed 2-6
Figure 2-4. ESD Protected Environment 2-9
Figure 2-5. Grounding Clip 2-10
Figure 2-6. Ejector in Full-Open Position 2-11
Figure 2-7. Installing an FESA 2-12
Figure 2-8. FESA Hardware Cable Connection 2-13
Figure 2-9. FESA External Indicators 2-15
Figure 3-1. FESA Planning Worksheet 3-4
Figure 3-2. FESA Slot Locations 3-19
Figure 3-3. ESD Protected Environment 3-21
Figure 3-4. Grounding Clip 3-22
Figure 3-5. Removing an FESA 3-23
Figure 3-6.
Ejector Shown in Full-Open Position 3-25
Figure 3-7.
Installing an FESA 3-26
Figure 3-8. FESA Hardware Connection 3-27
Figure 3-9. FESA External Indicators 3-29
Figure 4-1. FESA Planning Worksheet 4-4
Figure 4-2. FESA Slot Locations 4-20
Figure 4-3. ESD Protected Environment 4-22
Figure 4-4. Grounding Clip 4-23
Figure 4-5. Removing an FESA 4-24
Figure 4-6. Ejector Shown in Full-Open Position 4-25
Figure 4-7. Installing an FESA 4-26
Figure 4-8. FESA Hardware Connection 4-27
Figure 4-9. FESA External Indicators 4-29