Fast Ethernet Adapter Installation and Support Guide

Replacing an FESA

Fast Ethernet Adapter Installation and Support Guide—425685-003

3-30

Resume Operations

The following describes starting the new FESA.

Start the New FESA

Start the Fast Ethernet ServerNet adapter (FESA) ADAPTER object and its

subordinate SAC and PIF objects.

You can use either SCF or the TSM Service Application to start the FESA.

Using SCF to Start the FESA

Use the SCF START ADAPTER command with the SUB ALL option. The SUB ALL

option starts the ADAPTER object and its subordinate objects.

START ADAPTER $adapter-name, SUB ALL

Using the TSM Service Application to Start the FESA

1. Log on to the TSM Service Application.

2. In the

Tree view, select the FESA.

3. From the Display menu, choose Actions.

4. Select Start.

5. Click Perform action.

Table 3-3. Resuming Operations Checklist

Step Description Comments

Start the New FESA

Restart the Communications Lines See Note below.

Verify that the Communications Lines are Restarted

Resume Customer Applications

Note. You need to perform this step if you stopped communications lines or if an IPXPROTO

process was using the FESA CRU that was replaced. IPXPROTO processes must be manually

restarted after an FESA CRU is replaced.