Fast Ethernet Adapter Installation and Support Guide

Replacing an FESA
Fast Ethernet Adapter Installation and Support Guide—425685-003
3-37
Verify that the Communications Lines are Restarted
b. Verify that the WAN subsystem IOPs are in the STARTED state.
Use the SCF STATUS DEVICE command:
STATUS DEVICE $ZZWAN.#device-name
Example 3-35 shows the output of this command. Note that the WAN
subsystem input/output process (IOP) is in the STARTED state.
Example 3-34. SCF STATUS ADAPTER Command
->STATUS ADAPTER $ZZWAN.#S01, SUB ALL
WAN Manager STATUS ADAPTER for ADAPTER \COWBOY.$ZZWAN.#S01
State....... STARTED
Number of clips. 3
Clip 1 status : CONFIGURED
Clip 2 status : CONFIGURED
Clip 3 status : CONFIGURED
WAN Manager STATUS SERVER for CLIP \COWBOY.$ZZWAN.#S01.1
State :...... STARTED
Path A.......: CONFIGURED
Path B.......: CONFIGURED
Number of lines. 2
Line............ 0 : FREE
Line............ 1 : FREE
WAN Manager STATUS PATH for PATH \COWBOY.$ZZWAN.#S01.1.A
State :...... STARTED
MEDIA TYPE..... ETHERNET
MEDIA ADDRESS.. %H08008E004814
WAN Manager STATUS PATH for PATH \COWBOY.$ZZWAN.#S01.1.B
State :...... STARTED
MEDIA TYPE..... ETHERNET
MEDIA ADDRESS.. %H08008E004815
WAN Manager STATUS TASK for TASK \COWBOY.$ZZWAN.#S01.1.DIAG
State :...... STARTED
WAN Manager STATUS TASK for TASK \COWBOY.$ZZWAN.#S01.1.DLC0
State :...... STARTED
CLIP Path Name.... A TCPIP Port used.... 5000
CLIP Protocol Id.. 1 Interface Type..... 0
Clip Program...... $SYSTEM.CSS01.C1096P00
Program timestamp. 17 Jan 1997, 11:35:04.890
WAN Manager STATUS TASK for TASK \COWBOY.$ZZWAN.#S01.1.DLC1
State :........ STARTED
CLIP Path Name.... A TCPIP Port used.... 5001
CLIP Protocol Id.. 1 Interface Type..... 0
Clip Program...... $SYSTEM.CSS01.C1096P00
Program timestamp. 26 Mar 1997, 13:36:04.981
Example 3-35. SCF STATUS DEVICE Command
->STATUS DEVICE $ZZWAN.#LINE1
WAN Manager STATUS DEVICE for DEVICE \COWBOY.$ZZWAN.#LINE1
State :........ STARTED
LDEV number.... 110
PPIN........... 2 ,13 BPIN......... 3 ,14