Fibre Channel ServerNet Adapter Installation and Support Guide (G06.24+, H06.03+)

Introduction to the FCSA
Fibre Channel ServerNet Adapter Installation and Support Guide—528254-010
1-9
FCSA External Connectors, Indicators, and Cables
The fibre-channel port status LEDs indicate the activity on the fibre-channel ports:
The FCSA has an ejector latch that holds the adapter in place by fitting under the lip of
the enclosure. This latch has a white label which contains a bar code, Track ID, and
part number for tracking the FCSA’s physical location. (See Figure 1-6.)
Hardware State
Green LED
(2 Gbps)
Amber LED
(1 Gbps) Description
Power Off Off Off
Power On, before
firmware download
On On
Power On, after
firmware
initialization
1 flash 1 flash Both flashing at the same time
Firmware fault 2 flashes 2 flashes Alternate flashing
1 Gbps link UP Off On
2 Gbps link UP On Off
Activity at 1 Gbps Off 5 flashes
per second
Activity at 2 Gbps 5 flashes
per second
Off