Fibre Channel ServerNet Adapter Installation and Support Guide (G06.24+, H06.03+)

Introduction to the FCSA

Fibre Channel ServerNet Adapter Installation and Support Guide—528254-010

1-12

RAM Firmware

For disks that are not used for system load, operational firmware is downloaded to the

FCSA when you issue the first START DISK command to the first disk drive in the fibre

channel loop.

Manufacturing Naming Conventions

HP manufacturing’s naming convention for processes and devices relates logical

names to the physical location of devices.

group

(NonStop S-Series)

is the two-digit number that identifies the IOAM enclosure that contains the FCSA.

group

(Integrity NonStop NS-Series)

is in the range 110 through 115.

module

identifies whether the FCSA is installed in module 2 or 3 of an IOAM enclosure. A

module is either 2 or 3.

Table 1-4. Naming Convention for Storage Subsystem and Related Processes

Process or Device Type Convention

Storage Subsystem

Manager process

Must be $ZZSTO

Fibre Channel ServerNet

adapter (FCSA)

$ZZSTO.#FCSA.GRP-group.MOD-module.SLOT-slot

Enterprise Storage System $ESSnumber

FC Disk Drive in a Drive

Enclosure (Integrity

NonStop NS-Series)

$FCDMnumber

Modular Tape Drive

(Integrity NonStop NS-

Series)

$TAPEnumber

group Description Range of Values

0n The object is in processor enclosure n.01-08

1n The object is in I/O enclosure n. 11,12,13,14,15