Fibre Channel ServerNet Adapter Installation and Support Guide (G06.24+, H06.03+)

Contents

Fibre Channel ServerNet Adapter Installation and Support Guide—528254-010

2. Installing an FCSA

Overview of FCSA Installation Procedures 2-1

ESS Connection 2-1

Disk Drive Enclosure Connection 2-2

Tape Drive Connection 2-3

Prepare to Install an FCSA 2-3

Plan the Installation 2-3

Start Completing the Configuration Forms 2-4

Disk Drive Enclosure Connections 2-7

Gather the Proper Tools 2-8

Review Standard Operating Practices 2-8

Make Sure the Slot was not Previously Configured 2-9

Ensure the IOAM is Powered On 2-9

Install the FCSA 2-10

Unpack and Inspect the FCSA 2-10

Install the FCSA 2-11

Label the Cables 2-13

Verify the Installation of the FCSA 2-14

Verify the Hardware Installation 2-14

Verify the Presence of the FCSA in the Configuration Database 2-14

Troubleshoot the Installation 2-15

DISK Configuration (ESS Connection) 2-15

Download the Firmware 2-15

Start the DISK 2-16

Obtain the Fibre Channel Port WWNs and Complete the FCSA to ESS

Configuration Form 2-17

Connect External Paths 2-19

DISK Configuration (Disk Drive Enclosure Connection)

2-21

Verify the Disk Configuration

2-21

Troubleshoot the Disk Configuration 2-22

Error -2 or 190 2-22

Error 66 2-22

TAPE Configuration 2-23

Verify the TAPE Configuration 2-24

3. Replacing an FCSA

Overview of FCSA Replacement Procedures 3-1

Prepare to Replace an FCSA 3-2

Preparation Checklist 3-2