Fibre Channel ServerNet Adapter Installation and Support Guide (G06.24+, H06.03+)

Installing an FCSA
Fibre Channel ServerNet Adapter Installation and Support Guide—528254-010
2-19
Connect External Paths
The WWN of each SAC is identified by the Port Name field. In this example, the
WWN of SAC 1 is 50060B00001D535C and of SAC 2 is 50060B00001D535E.
Complete the Configuration Forms
Complete the FCSA to ESS Connection form. Figure 2-4 shows a sample completed
form.
Also use the WWNs to complete the SAC 1 and SAC 2 WWNs on the FCSA
Configuration Form.
Connect External Paths
To complete this task, coordinate with the FC switch administrator (if you are
connecting to the ESS through an FC switch) and with the ESS administrator. Provide
them with the FCSA to ESS connection form as shown in Figure 2-4 and ask them to:
Figure 2-4. Example of a Completed FCSA to ESS Connection Form
FCSA Administrator Name: Date:
NonStop System Name G, M, S
S
A
C
#
World Wide Name of SAC
World Wide Name of ESS Port
VST013.vsd
Myname
5/28/2004
Mysys 22, 3, 2 1 50060B00001D17FC
50060B00001D17FE22, 3, 2
2
50060e8003501203
50060e80034e8711