Fibre Channel ServerNet Adapter Installation and Support Guide (G06.24+, H06.03+)

Replacing an FCSA

Fibre Channel ServerNet Adapter Installation and Support Guide—528254-010

3-11

Download Firmware for One FCSA

To download the firmware by using OSM:

1. Log on to the OSM Service Connection.

2. Expand the tree pane to locate and select the FCSA you want to check.

3. Right-click the FCSA object and select Actions.

4. Select Flash Boot Firmware Update from the Available Actions list and click

Perform action.

5. After a confirmation dialog, a Parameter Input dialog box allows you to specify an

alternative file location for the version to use for the update (optional; only

necessary if the location of the file to be used does not match the location specified

by the Flash Boot Firmware Default File Name attribute).

To download firmware by using the SCF REPLACE ADAPTER command.To download

Flash Boot Firmware, issue:

REPLACE ADAPTER, $ZZSTO.#fcsa, FLASHBOOT [$vol.]subvol.]filename

To download Flash Firmware (Integrity NonStop NS-series servers):

REPLACE ADAPTER ZZSTO.#fcsa, FLASHFIRMWARE [$volume.]subvol.]filename

To download operational Firmware from RAM, issue:

REPLACE ADAPTER ZZSTO.#fcsa, FIMRWARE [$volume.]subvol.]filename

Download Firmware for Multiple FCSAs

To check and update the firmware on more than one FCSA using the OSM Service

Connection:

1. Log on to the OSM Service Connection.

2. From the Display menu, select Multi-Resource Actions (this action brings up the

Multi-Resource Actions dialog box).

3. Select FCSA from the Resource Type drop-down list.

4. Select Flash Boot Firmware Update from the Action drop-down list.

5. In the list of available FCSAs, compare the Flash Boot Firmware Version attribute

with the Default File Version. If the Flash Boot Firmware Version is older than the