Fibre Channel ServerNet Adapter Installation and Support Guide (G06.28+, H06.06+, J06.03+)

Table 1-2 Power-Status and Fault-Indicator LEDs (continued)
DescriptionStateLED
Adapter is functional.Not litAmber
Adapter internal failure or service
action is indicated by the software or
the technician.
Lit
After installing the FCSA, the amber
LED should light up immediately and
should go off within a minute.
In addition to the power-status and fault-indicator LEDs, there are four LEDs status indicators
for the ports on the FCSA, two for each port. These LEDs provide status information for each
port:
• Gigabit-link status
• 2-Gigabit link status
Overview of the FCSA 19