Fibre Channel ServerNet Adapter Installation and Support Guide (G06.28+, H06.06+, J06.03+)

daisy-chained FCDMs. FCDMs that are not
daisy-chained each have a shelf number of 1,
even if there can be four of them sitting on
different physical racks.
bay
is the number of the disk. bay is in the range 1
through 14.
When specified in the a DEVICEID attribute, these identifiers must be enclosed in parentheses.
Relationship to Modular Tape
For Integrity NonStop NS-series systems, the FCSA provides connectivity to SCSI tape drives
through the M8201 Fibre Channel to SCSI router. The SCF TAPE attributes used to configure
such connections are listed in Tape Configuration on page 2-22.
Relationship to Fibre Channel Tape Drives
For NonStop S-series systems, the FCSA provides direct connectivity to Fibre Channel tape
drives. For information about installing and configuring Fibre Channel tape drives, refer to the
manual for the particular tape drive product. For information about the Fibre Channel tape drives
supported for direct connection to an FCSA, refer to the NonStop S-Series Hardware Installation
and FastPath Guide.
Relationship to Modular Tape 27