Fibre Channel ServerNet Adapter Installation and Support Guide (G06.28+, H06.06+, J06.03+)

Status......... PRESENT
Connection..... Loop Node Name......... 50060B00001D535F
Port Id........ 1 Port Name......... 50060B00001D535E
SAC State...... Ready SAC Subtype....... 1
Configured Devices ( group: 11, module: 3 ):
Slot Name State Substate Primary Backup
PID PID
5 $FISH210-P *STARTED 1,344 0,332
5 $FISH204-B STARTED 1,336 0,324
5 $FISH209-P *STARTED 1,343 0,333
5 $FISH205-B STARTED 1,337 0,323
5 $FISH211-P *STARTED 1,345 0,331
5 $FISH206-B STARTED 1,338 0,322
5 $FISH203-B STARTED 1,335 0,325
5 $FISH207-P *STARTED 1,341 0,321
5 $FISH202-B STARTED 1,334 0,326
5 $FISH201-B STARTED 1,333 0,327
5 $FISH208-P *STARTED 1,342 0,320
The WWN of each SAC is identified by the Port Name field. In this example, the WWN of SAC
1 is 50060B00001D535C, and SAC 2 is 50060B00001D535E.
Complete the Configuration Forms
Complete the FCSA to ESS Connection form. Figure 2-4 shows a sample completed form.
62 Replacing an FCSA