File Utility Program (FUP) Management Programming Manual

FUP Error Messages

File Utility Program (FUP) Management Programming Manual—523322-001

B-19

19: ZFUP-ERR-SPI

The command failed with a Subsystem Programmatic Interface (SPI) error.

Tokens

ZSPI-TKN-ERROR

is the standard SPI error token, which consists of the FUP subsystem ID and the

error number ZFUP-ERR-SPI (19). This token is always in the error list.

Recommended Action

FUP ends abnormally. An internal software error might have occurred.

The second error list describes an SPI (ZSPI-SSN-ZSPI) error. To determine the cause

of the error, enter this second error list. For details about extracting tokens from nested

error lists, see Handling FUP Errors on page 2-17.

Enter the command again with the INSPECT SAVEABEND RUN option to produce a

saveabend file. Contact your service provider and provide all relevant information:

•

Saveabend file

•

History of all commands and tokens sent to FUP and the tokens returned by FUP

since FUP was started (as comprehensive as possible)

•

Description of the problem and accompanying symptoms

•

Details from the message or messages generated

•

Supporting documentation such as Event Management Service (EMS) logs, trace

files, and a processor dump, if applicable

If your local operation procedures require contacting the Global Customer Support

Center (GCSC), supply your system number and the numbers and versions of all