File Utility Program (FUP) Management Programming Manual
ORSERV Error Messages
File Utility Program (FUP) Management Programming Manual—523322-001
C-11
11: ZORS-ERR-SPI
11: ZORS-ERR-SPI
The command failed with a Subsystem Programmatic Interface (SPI) error.
Tokens
ZSPI-TKN-ERROR
is the standard SPI error token, which consists of the ORSERV subsystem ID and
the error number ZORS-ERR-SPI (11). This token is always in the error list.
Recommended Action
ORSERV ends abnormally. An internal software error might have occurred.
The second error list describes an error reported by the SPI subsystem
(ZSPI-SSN-ZSPI). An application must enter this error list to determine the cause of
the error. For details about extracting tokens from nested error lists, see Handling
ORSERV Errors on page 4-14.
Enter the command again with the INSPECT SAVEABEND RUN option to produce a
saveabend file. Contact your service provider and provide all relevant information:
•
Saveabend file
•
The command and token values sent to ORSERV
•
The token values returned by ORSERV in the response buffer
•
Description of the problem and accompanying symptoms
•
Details from the message or messages generated
•
Supporting documentation such as Event Management Service (EMS) logs, trace
files, and a processor dump, if applicable
If your local operation procedures require contacting the Global Customer Support
Center (GCSC), supply your system number and the numbers and versions of all
related products as well.
ZSPI-TKN-ERRLIST token-type ZSPI-TYP-LIST.
ZSPI-TKN-ERROR token-type ZSPI-TYP-ERROR.
ZSPI-TKN-ERRLIST token-type ZSPI-TYP-LIST.
Error list with error returned by ZSPI-SSN-ZSPI
ZSPI-TKN-ENDLIST token-type ZSPI-TYP-SSCTL.
ZSPI-TKN-ENDLIST token-type ZSPI-TYP-SSCTL.