Flow Map Manual

Flow Map Error Messages
B–2 098935 Tandem Computers Incorporated
1006 Cannot view the next level because you are now on the highest
level.
Cause. You cannot view the next level because there are no levels following your
current view.
Recovery. This command is not necessary since you are at the highest level. No action
is required.
1007 Unable to open named file!
Cause. Flow Map was unable to open the named file. This could be due to insufficient
memory or to the file being damaged.
Recovery. See if you can open the file in a stand-alone session. If you can, you could
have insufficient memory allocated to Excel. Increase the memory available to your
Excel session and try again. If you cannot open the file, then the file is probably
damaged. Attempt to recreate it.
1009 Cannot read drive.
Cause. The named drive cannot be read because its door is open or the disk is not
correctly formatted.
Recovery. Verify that the door is closed and the disk is correctly formatted.
1010 You cannot add unattached text on top of a graphical object.
Cause. The current selection in your diagram is a connecting arrow or an object. Text
cannot be added on an arrow or an object.
Recovery. Select an area of your view other than an arrow or an object and try this
command again.
1011 Cannot group because the current selection is not one or more
objects.
Cause. Your current selection is not an object.
Recovery. Select the objects that you want to group, then try the Group command. You
can select several objects by selecting the first one and then holding down the SHIFT
or CTRL key as you select the others.