Flow Map Manual

Flow Map Error Messages
098935 Tandem Computers Incorporated B–5
1024 Replace existing Flow Map report?
Cause. A report with the same name already exists.
Recovery. If you want to overwrite the existing report, press the OK button.
Otherwise, press Cancel.
1025 Unable to find Flow Map Help File.
Cause. The Flow Map help file could not be found in the Flow Map directory.
Recovery. Re-install Flow Map.
1026 Cannot select paths because current selection is not an
object.
Cause. Your current selection is not a Flow Map object.
Recovery. Select the object of interest and try this command again.
1027 More than one object is selected! You cannot select paths for
more than one object at a time.
Cause. You have chosen Paths from the Connect menu with more than one object
selected.
Recovery. Select the object of interest and try this command again.
1028 Not enough resources to create diagram.
Cause. You have attempted an Open Host command but there are not sufficient
resources available for Flow Map to crate the diagram.
Recovery. Close one or more diagrams or reports to free resources, then retry the
command.
1033 Macro error at cell: <Error Address>. Processing aborted.
Cause. A Flow Map program error has occurred.
Recovery. Make a note of this message and contact your Tandem analyst.