Flow Map Manual

Object Menu
Flow Map PC
4–12 098935 Tandem Computers Incorporated
Redraw The Redraw command redraws the current view of a diagram from the original Flow
Map Host data. A warning message displays before the diagram is redrawn. The
current view is shown as Old View n, where n is the current view number. The Old
View is saved as the same name as the current view, but the first character of the name
is replaced by an underscore ( _ ).
Shortcut
None
Object Menu Use the Object menu to work with individual Flow Map objects in the current view.
The commands on the View menu perform functions that apply to all objects in the
view.
Undo Command The Undo command reverses the effect of the last Group, Ungroup, Delete or Undo
command. If the last command you used was one of these, you can use this command
to undo its effects. Undo must be executed immediately after one of these commands.
At all other times, Undo changes to Can't Undo and appears dimmed.
Shortcut
None
Object Info The Object Info command displays information about the selected Flow Map object.
You must select an object before choosing this command. A dialog box displays the
object name, type, fixed attributes, and selectable attributes. Fixed attributes display
on the left side of the dialog box. You can select the attributes that display on the right
side by selecting attributes from the list boxes.