G06.24 Software Installation and Upgrade Guide

Updating Processor Boot Code

G06.24 Software Installation and Upgrade Guide—528593-005

8-10

Method 2: Using Your Current Pre-G06.24 OSM or

TSM SPRs, Update the Processor Boot Code and

Method 2: Using Your Current Pre-G06.24 OSM

or TSM SPRs, Update the Processor Boot

Code and Issue a Hard Reset or Equivalent

•

Using TSM, Update the Processor Boot Code and Issue a Hard Reset or

Equivalent on page 8-10

•

Using OSM, Update the Processor Boot Code and Issue a Hard Reset or

Equivalent on page 8-14

Using TSM, Update the Processor Boot Code and Issue a Hard

Reset or Equivalent

From the TSM Service Application, use the Firmware Update dialog box to update the

processor boot code offline for each PMF CRU in your system:

1. Log on to the TSM Service Application.

2. Select Display>Firmware Update.

The Firmware Update dialog box appears.

3. From the Resource Type list, select Processor Boot Code, Y-side.

4. From the Display list, select All to list the selected resources in the Available box:

Note. You can also perform a hard reset using the TSM or OSM Low-Level Link on all

processors when you perform a system load instead of using the Reset action. See The Reset

Operation on page 11-8.