G06.24 Software Installation and Upgrade Guide

Resuming Normal Operations

G06.24 Software Installation and Upgrade Guide—528593-005

12-4

Reconfigure System Console Applications

Using TSM to Reconfigure Primary and Backup Dial-Out Points

See the TSM client software online TSM Configuration Guide or the TSM Notification

Director Application online help for information on reconfiguring the primary and

backup dial-out points.

Using TSM to Reconfigure Your Site Contact Information

Use the TSM Notification Director Application to configure your site contact

information. See the TSM Configuration Guide or the TSM Notification Director

Application online help for more information.

Using OSM (If Installed) to Reconfigure Site Contact Information

and Backup Dial-Out Points

Perform this step if you want to use OSM when it is already installed and configured on

both the server and client side. See the OSM Notification Director online help for more

information.

Check Processor Status (Using TSM or OSM)

Before you update firmware, verify that all processors in the system are up and running

the G06.24 version of the NonStop Kernel operating system:

1. If necessary, log on to the TSM Low-Level Link or the OSM Low-Level Link

Application.

2. Check processor status by selecting Processor Status.

The Processor Status should be Executing NonStop OS.

Note. You can have both the TSM client and the OSM client-based components on your

system consoles. However, to avoid duplicate dial-outs, use either the OSM Notification

Director (ND) or TSM Notification Director, but not both.